|
3.3 INSTALLATION
A. Install reflective insulation/radiant barrier material in
accordance with drawing details and manufacturer's
installation instructions.
B. Maintain minimum 3 inches (76 mm) distance from heat-
producing devices such as furnaces, chimneys, blowers,
and lighting fixtures.
C. Maintain minimum 3/4 inch (19 mm) air space each side of
reflective insulation/radiant barrier material.
NOTE ** The following schedule will assist in identifying
locations where Astro-Foil is to be used on the
project; it lists the most common applications of
the product. Delete inapplicable sub-paragraphs
and add other locations as required; consult the
dealer for additional uses.
3.4 SCHEDULES
A. Locations:
1. Over roof trusses/rafters, encapsulated (RIS).
2. Over roof trusses/rafters, exposed (RBS)(RIS).
3. Interior side of wall studs/furring, exposed
(RBS)(RIS).
4. Interior side of wall studs/furring, encapsulated
(RIS).
5. Underside of floor joists/trusses, exposed
(RBS)(RIS).
6. Underside of floor joists/trusses, encapsulated
(RIS).
7. Underside of first floor joist/trusses at crawl
spaces, exposed (RBS)(RIS).
8. Below interior ceiling joists/trusses/rafters,exposed
(RBS)(RIS).
9. Below interior ceiling joists/trusses/rafters,
encapsulated (RIS).
9. Over metal roof purlins, exposed (RBS)(RIS).
10. Over metal roof purlins, encapsulated (RIS).
11. Exterior side of metal wall purlins, encapsulated
(RIS).
12. Interior side of upward-acting sectional doors,
exposed (RBS).
13. Wrap HVAC supply ducts, exposed (RIS)(RBS).
14. Wrap water heaters, exposed (RIS)(RBS).
15. Wrap water supply piping, exposed (RIS)(RBS).
END OF SECTION
|
|
