A. Radiant Barrier System (RBS): Radiant barrier material
is sight-exposed to building interior, not concealed in
system by subsequent building finishes.
B. Reflective Insulation System (RIS): Reflective
insulation material is concealed in system by subsequent
building finishes; additionally, RIS incorporates air
spaces between the two reflective surfaces.
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's descriptive literature for
reflective insulation material; indicate compliance to
specified product characteristics, including
documentation of code compliance, if documentation is
C. Verification Samples: Two samples, minimum size 8 inches
(203 mm) square, of actual products to be installed.
D. Quality Assurance Submittals: Manufacturer's printed
installation instructions for each indicated project
condition; include recommended fastening materials and
1.6 QUALITY ASSURANCE
A. Regulatory Requirements: Reflective Insulation/Radiant
Barrier Material approved for indicated use by the
1. Canadian Building Authority.
2. California Code Regulations.
3. City of Los Angeles CA Code Regulations.
4. Dade County, Florida Acceptance No. 98-0413.01
5. SBCCI Report NO: 2053
B. Mark materials to indicate code compliance in accordance
with requirements of regulating authority before delivery
of materials to project site.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products of this section in manufacturer's unopened
packaging until installation; maintain storage conditions
recommended by manufacturer. Store in clean, dry area.
Do not expose to rain, dew, or snow while still in roll